Theikan EC1 Beholderis a 3-axis handheld gimbal stabilizer for DSLR and mirrorless cameras weighing between 2 - 4.5 lb. The EC1 offers unlimited 360° rotation along the yaw, pitch, and roll axes, and features an advanced 32-bit controller and 12-bit encoder system. The gimbal employs an adaptive PID algorithm to deliver stable rotation.
Unlimited 360° Rotation
The EC1 Beholder features three 360° rotating brushless motors that give you a limitless range of motion along all three axes: yaw, roll, and pitch.
Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer.
In Lock Mode, the Yaw, Pitch, and Roll axes work together to keep the camera fixed and pointed in one direction. The camera's position will stay the same no matter how you move the handle.
Point & Lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Multiple Follow Modes
The EC1 features 3 different follow modes. In yaw-axis follow mode, the EC1 will only follow your pan movements. In pitch and yaw-axis follow mode, the EC1 will follow your pan and tilt movements. The 3-axis follow mode gives you full control, allowing you to pan, tilt, and roll.
Switch to inverted mode at any time by simply flipping the handle over the camera. Inverted mode can be operated in conjunction with any of the lock and follow modes.
OLED Status Display
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.
Featuring a newly-designed quick-release baseplate system, the EC1 is easy to balance without any tools.
Multiple Mounting Points
The EC1 handle a 1/4"-20 threaded mounting hole for attaching accessories such as a light, microphone, or monitor for advanced setups; and a 3/8"-16 threaded mounting hole on the bottom of the handle for to mount the EC1 on a tripod, jib, or dual handle support system such as the ikan DGH.
Durable All Aluminum Construction
360 Degree Movement from All Axis (Pitch, Yaw & Roll)
Works with DSLR & Mirrorless Cameras between 2.0 to 4.5 lbs
Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless & DSLR Cameras